Sterowniki, czujniki, filtry redukcyjne, przetworniki i pozycjonery

ADCATrol® Manual operated linear actuator ADCA MAH

• Actuator construction

  Carbon steel construction (standard),
  Stainless steel construction (special execution)

• Actuator type

  Manual operated

• Max. force

  20 kN (MAH180), 33,5 kN (MAH250), 41,5 kN (MAH400)

• Required manual pull force

  from 250 to 500 (N)

• Rated stroke

  30 mm. (MAH180 , MAH250), 60 mm. (MAH400)

• Operation temperature

  from -20 ºC to +100 ºC

• Manual control

  Handwheel

ADCATrol® Blowdown Controller ADCA BCS220 with steam boilers

• Applications

  TDS and intermittent blowdown control in one single unit.

• Supply voltage

  90 to 265 V AC, 10 W max. (BCS220 ),
  12 to 30 V DC, 5 W max. (BCS220-LV)

• IP rating

  IP 66 NEMA 4X

• Output

  Analog 0(4) to 20 mA, 750 ohms max., fully isolated to 2 kV,
  Relay 2 NO volt free contacts 5A @ 30 V DC / 5A @ 250 V AC

• Input Signal

  2-, 3-, or 4-wire input, temperature sensor; analog 0(4) to 20 mA; Digital*,
  (*)Digital input suitable for connection to the boiler stand-by/burner contact, to reduce energy waste.

• Range selection

  Internal single or auto range

• Measuring ranges*

  0 to 99,99 μS/cm up to 0 to 999,9 mS/cm,
  0 to 99,99 KΩ/cm up to 0 to 9,999 MΩ/cm,
  0 to 99,99 ppm up to 0 to 99,99 ppt,
  (*)See conductivity, TDS and resistivity range tables for further information.

• Temperature measurement

  Range: of +50 °C to +300 °C

ADCATrol® Resistance Temperature probes PT-100 ADCA TRPT1

• Applications

  Temperature measurement in pipelines and vessels.

• Max. operating conditions

  36,5 bar @ +400 ºC

• Temperature range

  -10 ºC to +300 ºC (Class A), others on request*

• Ambient temperature

  -20 ºC to 80 ºC

• Sensing element

  RTD three wire device according to EN 60751 Class A

• Enclosure/head

  KNE

• IP rating

  IP 66

• Output

  3 wire Pt100 to EN 60751 – Class A

• Approvals

  ATEX approved version on request

• Sizes and connections

  Male thread ISO 228 G – 1/2''

ADCATrol® Resistance Temperature probes PT-100 ADCA TRPT1T with analog transmitter

• Applications

  Temperature measurement in pipelines and vessels.

• Max. operating conditions

  36,5 bar @ +400 ºC

• Temperature range

  0 to +200 ºC (others programmable),
  The device is calibrated from factory for a 0 to 200 ⁰C

• Temperature limits*

  -10 to +300 ⁰C,
  (*)The range must always fall between the device's temperature limits!

• Ambient temperature

  -20 ºC to +80 ºC

• Sensing element

  RTD three wire device according to EN 60751 Class A

• Enclosure/head

  KNE

• IP rating

  IP 66

• Output

  4 to 20 mA (2-wire)

• Transmitter

  2 wire 4 to 20mA temperature transmitter

• Transmiter thermal drift deviation

  Input 0,06 ºC / 10 ºC ,
  Output 0,02% of span / 10 ºC

• Power supply

  10 to 30 V DC

• Max. loop resistance

  681 Ω at 24 V DC, 954 Ω at 30 V DC

• Approvals

  ATEX approved version on request

• Sizes and connections

  Male thread ISO 228 G – 1/2''

ADCATrol® TDS/conductivity probe ADCA SPS21 In-line

• Applications

  Measure conductivity of superheated boiler water, condensate and feedwater.

• Max. operating pressure

  32 bar

• Max. operating temperature

  +239 ºC

• Max. ambient temperature

  +100 ºC

• Min. distance to other metallic surfaces

  20 mm.

• Type of protection

  IP 65

• Dimensions & Mounting

  with a 41.5 mm probe rod

• Cable entry

  M16 x 1,5 (PG 11)

• Sizes & Connections

  Male threaded ISO 7 R 1/2''

ADCATrol® TDS/conductivity probe ADCA SPS21 for sandwiching between flanges

• Applications

  Measure conductivity of superheated boiler water, condensate and feedwater.

• Max. operating pressure

  32 bar

• Max. operating temperature

  +239 ºC

• Max. ambient temperature

  +100 ºC

• Min. distance to other metallic surfaces

  20 mm.

• Type of protection

  IP 65

• Dimensions & Mounting

  with a 41.5 mm probe rod

• Cable entry

  M16 x 1,5 (PG 11)

• Sizes & Connections

  flange chamber DN20x1/2" PN40,
  flange chamber DN25x1/2" PN40

ADCATrol® Digital Electro-Pneumatic Positioner ADCA PS100

ADCATrol® Intelligent Electro-Pneumatic Positioner ADCA TZIDC