Электрические приводы
Подбор по параметрам
- 10 продуктов на страницу
- 25 продуктов на страницу
- 50 продуктов на страницу
- Актуальность
- Создан в
- Код продукта
- Имя
- Доступный
-
Valsteam ADCA
Product code: E.12.1XXXA1
ADCATrol® Linear electric actuators ADCA EL
-
Actuator construction
Steel construction
-
Actuator type
Electric linear actuator
-
Actuator direction of action
Direct action,
Reverse action -
Positioning force
EL12 (1,2 kN), EL20 (2,0 kN), EL45 (4,5 kN), EL80 (8,0 kN),
EL120 (12 kN) and EL250 (25 kN) -
Positioning speed
from 0,38 to 0,8 mm/s
-
Rated stroke
35 mm. (EL12), 50/75 mm. (EL20, EL45),
80 mm. (EL80, EL120), 100 mm. (EL250) -
Operation temperature
from -20 ºC to +60 ºC
-
Enclosure protection
IP 65 (EL12 IP 43)
-
Control signal
control via 3-point-step controllers (standard),
analogue input signals (0 to 10 V, 0(4) to 20 mA) -
Supply voltage
230 V AC 50/60 Hz (standard),
24 V AC, 115 V AC, 230 V AC, 400 V AC 50/60 Hz,
and 24 V DC -
Power consumption – 230 V
from 4 W (EL12) to 218 W (EL250)
-
Manual Emergency Control
Handwheel with Engine Shut-off
-
Communication
Fieldbus Interface
-
-
Valsteam ADCA
Product code: ELSXX1XX5XXXA1
ADCATrol® Intelligent linear electric actuators ADCA ELS with fail-safe spring return
-
Actuator construction
Steel construction
-
Actuator type
Intelligent, electric linear actuator, fail-safe spring return
-
Actuator direction of action
Direct action,
Reverse action -
Thrust
ELS20 (2,3 kN), ELS45 (4,5 kN), ELS80 (8 kN), ELS100 (10 kN),
ELS140 (14 kN), ELS200 (20 kN) and ELS250 (25 kN) -
Positioning speed
from 0,2 to 4,5 mm/s
-
Rated stroke
50 mm. (ELS20, ELS45), 50/65 mm. (ELS80, ELS100),
65 mm. (ELS140), 95 mm. (ELS200, ELS250) -
Operation temperature
from -20 ºC to +60 ºC
-
Enclosure protection
IP 65 protection (IP 67 on request).
-
Control signal
control via 3-point-step controllers (standard),
analogue input signals (0 to 10 V, 0(4) to 20 mA) -
Supply voltage
230 V AC 50/60 Hz (standard),
24 V AC, 115 V AC, 230 V AC, 400 V AC 50/60 Hz,
and 24 V DC -
Power consumption – 230 V
from 13 W (ELS20) to 88 W (ELS250)
-
Manual Emergency Control
Handwheel with Engine Shut-off
-
Communication
Profibus DP and Modbus RTU Interface
-
-
Valsteam ADCA
Product code: ELBXX1XXXX5XA1
ADCATrol® Linear electric actuators ADCA ELB
-
Actuator construction
Steel construction
-
Actuator type
Electric linear actuator
-
Actuator direction of action
Direct action,
Reverse action -
Thrust
ELB10 (1 kN), ELB20 (2,0 kN), ELB45 (4,5 kN), ELB80 (8 kN),
ELB100 (10 kN), ELB140 (14 kN), ELB200 (20 kN),
ELB250 (25 kN) and ELB300 (30 kN) -
Positioning speed
from 0,2 to 4,5 mm/s
-
Rated stroke
50 mm. (standard), 65 mm. on request
-
Operation temperature
from -20 ºC to +60 ºC
-
Enclosure protection
IP 65 protection (IP 67 or IP68 on request).
-
Control signal
control via 3-point-step controllers (standard),
analogue input signals (0 to 10 V, 0(4) to 20 mA) -
Supply voltage
230 V AC 50/60 Hz (standard),
24 V AC, 115 V AC, 230 V AC, 400 V AC 50/60 Hz,
and 24 V DC -
Power consumption – 230 V
from 7,2 W (ELB10) to 170 W (ELB300)
-
Manual Emergency Control
Handwheel with Engine Shut-off
-
Communication
Analog signals 0(2) to 10 V, 0(4) to 20 mA.
-
-
Valsteam ADCA
Product code: E.AVM234S
ADCATrol® Linear electric actuators ADCA AVM234S with positioner
-
Actuator construction
Housing Fire-retardant plastic,
gear unit made of sintered steel,
gearbox base-plate made of steel -
Actuator type
Electric linear actuator
-
Actuator direction of action
Direct action,
Reverse action -
Positioning force
2,5 kN
-
Positioning speed
from 0,17 to 0,50 mm/s
-
Rated stroke
49 mm.
-
Temperature of medium
Max. 130 ºC (180 or 240 ºC with accessories)
-
Enclosure protection
IP 66
-
Control signal
control via 2-point or 3-point-step controllers (standard),
analogue input signals (0 to 10 V, 0(4) to 20 mA) -
Supply voltage
24 V DC (standard),
230 V AC and 100 V AC 50/60 Hz -
Power consumption – 24 V
10 W
-
Manual Emergency Control
Crank handle for external manual adjustment with motor cut-off
-
Communication
Analog signals 0(2) to 10 V, 0(4) to 20 mA.
-
-
Valsteam ADCA
Product code: E.AVF234S
ADCATrol® Linear electric actuators ADCA AVF234S with spring-return feature
-
Actuator construction
Housing Fire-retardant plastic,
gear unit made of sintered steel,
gearbox base-plate made of steel -
Actuator type
Electric linear actuator, spring-return feature
-
Actuator direction of action
Actuator runs, spring driven, into its respective fail-safe position (thrust rod extended),
In modulating duty, the end position seating is made via limit switches. -
Positioning force
2 kN
-
Positioning speed
from 0,17 to 0,50 mm/s
-
Rated stroke
40 mm.
-
Temperature of medium
Max. 130 ºC (180 or 240 ºC with accessories)
-
Enclosure protection
IP 66
-
Control signal
control via 2-point or 3-point-step controllers (standard),
analogue input signals (0 to 10 V, 0(4) to 20 mA) -
Supply voltage
24 V DC (standard),
230 V AC and 100 V AC 50/60 Hz -
Power consumption – 24 V
10 W
-
Manual Emergency Control
Crank handle for external manual adjustment with motor cut-off
-
Communication
Analog signals 0(2) to 10 V, 0(4) to 20 mA.
-
-
Valsteam ADCA
Product code: ELFXX6XE5XA1
ADCATrol® Linear electric actuators ADCA ELF with fail-safe spring return, ATEX
-
Actuator construction
Steel construction
-
Actuator type
Electric linear actuator, fail-safe spring return
-
Actuator direction of action
Direct action,
Reverse action -
Positioning force
2 kN
-
Positioning speed
from 0,3 to 5 mm/s
-
Rated stroke
40 mm. (minimum 5 mm.)
-
Operation temperature
from -10 ºC to +60 ºC
-
Enclosure protection
IP 65 protection (IP 67 on request).
-
Control signal
control via 2-point or 3-point-step controllers (standard),
analogue input signals (0 to 10 V, 0(4) to 20 mA) -
Supply voltage
24 V AC/DC (standard),
230 V AC and 100 V AC 50/60 Hz -
Power consumption – 24 V
9 W (ELF20), 15 W (ELF20.1), 25 W (ELF20.2)
-
Manual Emergency Control
Via push-buttons (mechanical with handwheel on request).
-
Communication
Analog signals 0(2) to 10 V, 0(4) to 20 mA.
-
EX protection according
ATEX Ex / IECEx
-
-
Valsteam ADCA
Product code: ELR2A1XXXA1
ADCATrol® Linear electric actuators ADCA ELR with fail-safe spring return
-
Actuator construction
Steel construction
-
Actuator type
Electric linear actuator, fail-safe spring return
-
Actuator direction of action
Direct action,
Reverse action -
Thrust
from ≥ 0.9 to ≥ 2.2 kN (closing),
from ≤ 4.0 to ≤ 5.3 kN (opening) -
Positioning speed
from 0,29 mm/s
-
Rated stroke
35 mm. (ELR 2.1, ELR 2.2), 46 mm. (ELR 2.3)
-
Operation temperature
from -20 ºC to +50 ºC
-
Enclosure protection
IP 54
-
Control signal
control via 3-point-step controllers (standard),
analogue input signals (0 to 10 V, 0(4) to 20 mA) -
Supply voltage
230 V AC 50/60 Hz (standard),
24 V AC, 115 V AC, 230 V AC, 400 V AC 50/60 Hz,
and 24 V DC -
Power consumption – 230 V
8,5 W (motor), 15 W (magnet)
-
Manual Emergency Control
Electrical adjustment via push buttons,
(only possible when voltage is present) -
Communication
Fieldbus Interface
-
Test / approvals
TÜV according to DIN 32730,
safety functions for water and steam in heating systems.
Типоразмер:
0,9 kN – 5,3 kNPrice according to configurationДоступно под заказПодробнее о продукте -